Published at 383 × 394 in EN 12966 Testing
- “Control Panel Training Program”
- About Us
- AC DC Rectifier testing
- Accreditations & Approvals
- All About Masks
- Antenna and Convertor Testing
- Anti Rodent Test as as per TEC/GR/FA/DWC-034/02/AUG-19
- Anti-static Electrical Resistance Testing
- ASTM D999 – Vibration testing of shipping containers
- Atex Testing & Certification
- Automatic data processing machine- IS 13252(Part 1) IEC-60950
- Batteries for Portable Products Testing Lab (IS 16046/ IEC 62133)
- Battery Testing
- Biodegradability
- Biodegradability Testing
- Biodegradable Standard
- Blog
- Blood Pressure Monitor Testing
- Cable Gland Testing
- Cable Tray Testing
- Calibrate your Photometric equipment (Integrating sphere) to pass ALL third party Inspection with confidence
- Calibrating a UV intensity Meter
- Calibration for Impulse Measuring System
- Calibration of Electrical Fast Transients
- calibration of humidity chamber
- CALIBRATION OF HUMIDITY SENSOR
- calibration of micrometer
- CALIBRATION OF PRESSURE GAUGE
- CALIBRATION OF PROFILE PROJECTORS
- Calibration of Surge Generators
- CALIBRATION OF TEMPERATURE SENSOR
- Calibration of Voltage Dips and Short Interruption
- calibration of volumetric glassware
- Camera IP Testing
- CE Marking of Face Mask
- Chemical analysis testing
- Chemical Impurities detection testing
- Chemical Testing and Analysis
- CM4 calibration as per ISO 9060
- Comparative Evaluation between ANSI/IES Standards LM-79-19 and LM-79-08
- Confirm Subscription
- Contact Us
- Corrosion Testing
- Crash Test as per IEC 61010-1
- Customer Support
- Disposable Glove Testing – EN 455
- Drone Information Security Testing
- Drop Ball impact Test
- Ear Probe for Audiometry
- Earthing Enhancing Testing According to IEC 62561-7:2018
- Electric Cable Testing for Photovoltaic Systems
- Electrical Motor Testing
- Electrical safety Testing for Lighting products
- Electrical Safety Testing for Medical Devices
- Electrical Safety Testing of Electromedical Equipment
- Electrical Testing
- Electrical Testing for Automotive Components
- Electronic Push Button Telephone Testing
- Electronic Testing
- EMC Testing
- EMC/EMI Testing
- EMC/EMI Testing as per CISPR 11:2019
- EMC/EMI Testing as per IEC 61547:2020 & CISPR 15:2018
- EN 12966 Testing
- EN 301 489-1: V2.2.3 – EMC Compliance for Radio Equipment
- EN 301 489-19 V2.2.1 Testing – EMC for GNSS Receivers
- EN 301 489-52 V1.2.1 Testing for Cellular & LTE Equipment
- EN 62304:2006+A1/2015
- Endoscopic Equipment Testing
- Endurance Test as per IEC 60947-1
- Energy meter Calibration testing – NABL
- Environmental Testing
- Explosion Proof test
- Flame Retardant Test as per ISO 340
- Flame Testing on Cable: IEC 60332-1-2 & IEC 60332-1-1
- Flammability Test on Conveyor Belt EN ISO 340
- Flexible Conduit Testing IEC 61386-23
- FREE Testing for Ventilators as per ISO 80601-2-12 /IEC 60601-1
- G-Mark Certification
- Geometrical Accuracy Test as per IS 14877
- Gowns & Drapes Testing
- GRP Electrical Enclosure testing
- HAST Test (Highly Accelerated Stress Test)
- High voltage & short circuit test facility for Mcc and fuse
- Home
- Home Page
- HOUSEHOLD
- Household Equipment – Consumer Product Testing
- Household Equipment Testing
- IEC 60034-5 – Electrical Machines Safety & Protection Standard
- IEC 60068- Environmental Conditioning
- IEC 60068-2-6 Sine Vibration Testing Services
- IEC 60204-1 Safety of Machinery Testing
- IEC 60204-1 Testing
- IEC 60335 Standards: Get your household appliances certified to the highest safety standards.
- IEC 60335-1 / IS 302-1 and BS EN 60335-1
- IEC 60335-11 Particular requirements for tumble dryers
- IEC 60335-12 electric warming plates testing
- IEC 60335-2-12 Warming Plate Testing India
- IEC 60335-2-14 Electrical Kitchen Machine Testing
- IEC 60335-2-23
- IEC 60335-2-24
- IEC 60335-2-24 Refrigerators , Freezers, Ice maker Testing
- IEC 60335-2-3 Electric Irons Safety Testing
- IEC 60335-2-3/IS 302-2-3 ELECTRIC IRON TESTING
- IEC 60335-2-5 the safety of electric dishwashers for household
- IEC 60335-2-7 DOMESTIC WASHING MACHINE TESTING
- IEC 60335-2-7 Washing Machine Safety Testing
- IEC 60335-2-76 SAFETY OF ELECTRIC FENCE ENERGIZERS TESTING
- IEC 60335-2-8 Electric Shaver Safety Testing
- IEC 60335-2-89 COMMERCIAL REFRIGERATING APPLIANCES AND ICE-MAKERS TESTING
- IEC 60335-2-9 Electrical Cooking Appliances Testing
- IEC 60571 Testing Services
- IEC 60601 Testing
- IEC 60601 Testing. Elevate your electro-medical devices standards
- IEC 60601-1 Testing for Medical Electrical Equipment
- IEC 60601-1-2 EMC Testing Services in India
- IEC 60601-2-10 Testing for Nerve and Muscle Stimulators
- IEC 60601-2-19:2020 Medical electrical equipment Particular requirements for the basic safety and essential performance of infant incubators
- IEC 60601-2-2 Testing Services for High-Frequency Surgical Equipment Manufacturers
- IEC 60601-2-20 Testing Services for Infant Transport Incubators
- IEC 60601-2-21:2020 Medical electrical equipment Particular requirements for the basic safety and essential performance of infant radiant warmers
- IEC 60601-2-27 Particular requirements for the basic safety and essential performance of electro cardiographic monitoring
- IEC 60601-2-34 Medical electrical equipment Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment
- IEC 60601-2-5 Compliance Guide for Manufacturers and Regulatory Consultants
- IEC 60884-1 Plugs and Socket-Outlets for Household and Similar Purpose
- IEC 61000-6-1 EMC Testing Services in India
- IEC 61000-6-3 EMC Testing Services
- IEC 61010 testing Lab
- IEC 61010-1 / EN 61010-1 Testing for Electrical Equipment
- IEC 61010-2-010 Testing for Laboratory Equipment Used for the Heating of Materials
- IEC 61010-2-011 Testing for Laboratory Refrigerating Equipment
- IEC 61010-2-051 Testing for Laboratory Equipment for Mixing and Stirring
- IEC 61010-2-101 Testing Services for In Vitro Diagnostic (IVD) Medical Equipment
- IEC 61326 electromagnetic compatibility (EMC) for electrical equipment testing
- IEC 61373 Vibration Testing Services
- IEC 62208 testing empty enclosures for low-voltage switchgear and controlgear assemblies
- IEC 62304 medical device software System Testing
- IEC 62368-1:2023 Testing
- IEC 62444 For cable Gland testing
- IEC 62471 Photobiological safety of lamps and lamp systems
- IEC 63356-1:2022 PRV-LED light source characteristics
- IEC 80601-2-12 Certification for Critical Care Ventilators
- IEC 80601-2-49 Testing for Multifunction Patient Monitoring Equipment
- IEC 80601-2-74 Testing for Respiratory Humidifying Equipment
- Importance of EMI/EMC-proof PCB design
- Information Technology Testing
- Infrared Heater testing
- Infrared Optometer Calibration TESTING
- Ingress Protection IP Testing
- Inquiry
- Insulation Resistance Test on Cable as per IS 10810
- IP 66-Ingress protection Testing
- IP 67 waterproof testing
- IP 68 upto 5bar Testing
- IP Testing
- IP Testing Procedure
- IP41 Protection Rating – Testing Guide
- IP42 Protection Rating – Meaning and Compliance Guide
- IP55 Protection Rating
- IP56 Protection Rating Compliance
- IP69K Protection Rating – High Pressure & High Temperature Testing
- IS 7872 Testing-Deep Freezers
- IS 8448 – Automatic Line Voltage Correctors(ALVC)
- ISO 10218 Robotics Safety Testing India
- ISO 10218-1 INDUSTRIAL ROBOTS
- ISO 13482- SAFETY REQUIREMENT FOR PERSONAL CARE ROBOTS
- ISO 17088 compostable plastics Testing
- ISO 20653 IP Testing Services (IP5K, IP6K, IP9K)
- ISO 31101. Services provided by service robots – Safety management systems requirements
- ISO 5412:2022 compostable plastic shopping bags Testing
- ISO 80601-2-61:2017 Particular requirements for basic safety and essential performance of pulse oximeter equipments
- ISO 8768 – Complete, filled transport packages – Toppling test
- ISTA 1A/ 1B/ 1C/ 1D TESTING
- ISTA 2A/ 2B/ 2C
- JSS 0256-01 Environmental Testing Services
- JSS 50101 Environmental Testing Services
- JSS 55555 Environmental Testing Services
- JSS 5855-11 Environmental Testing Services
- JSS 5855-11 Testing for Defence Electronic Equipment
- jss-55555-2012-mil-std-461-g
- Laptop and Monitor Testing
- LED Driver and Lamp Control Gear Testing
- LED OT Light Testing
- LM 80 Testing
- LM-79 Testing
- LM-79 Testing Laboratory
- LM-79 Testing Laboratory in India
- Luminaire IP Testing: Ensuring Quality and Safety
- Luminaries/LED Product Testing
- Machinery Equipment Testing
- Major Tests Facility
- Measuring UV Intensity
- Mechanical testing
- Medical Bed Testing
- Metal – ISO 9227 – Salt spray test
- Microwave Oven Testing
- MID(Measuring Instrument Directive)
- MIL-STD-810H Vibration and Shock Testing Services
- MIXED FLOWING GAS (MFG) TESTING
- Mixer Grinder Testing
- Mixing and Stirring Laboratory Equipment Testing as per Standard IEC 61010-2-051
- Mobile Phone Handsets Part 3 Indian Language Support for Mobile Phone Handsets – Specific Requirements- IS 16333 (Part 3)
- Motor torque and speed testing
- N95 / EN 149 Face Mask Testing Lab
- Nerve and Muscle Stimulator Testing as per IEC 60601-2-10
- Non – Destructive Testing (NDT)
- Optical And Electrical Measurements of Solid-State Lighting as per LM 79
- PACKAGING
- Packaging Testing for Transportation of Lithium ion Batteries
- Particle Counter Calibration
- Patient Monitor testing IS 13450 PART 2 SEC 49/ IEC 80601-2-49/ISO 80601-2-49
- Payment
- Photometry Testing
- Photovoltaic Energy System IEC 61427
- Photovoltatc (PV) Modules Testing
- PIR(passive infrared sensor) Testing
- Power Inverter Testing
- Power Supply Equipment Testing
- Privacy Policy
- Products
- Pulse Oximeter Testing
- PVC insulated cables testing IEC 60227-1
- Rain Test Services in India – IP Water Ingress Testing Laboratory
- RDSO Environmental Testing for LED Based Luminaries
- RDSO Photometry Testing for LED Luminaries
- RDSO TL 0091 Testing Services
- Recyclability Test
- Recycling Testing
- Refrigerator Testing
- Resistance to salt and sulfur dioxide-laden atmospheres as per BS EN 50262.
- ROHS 3 Testing – NABL Report
- RoHS Testing
- ROHS Testing and Certification
- Room Heater Testing
- RRI(Recycle Reuse Index)
- Safety of laser products BS/EN 60825-1,IEC 60825-4:2022RLV
- Safety of power converters testing – photovoltaic power systems- (Up to 20kVA)- IEC 62109-1/IS 16221(Part 1)
- SAFETY STANDARD AS PER IEC 60335-8
- Safety Testing for Face Shield/Mask/Respirators Mask
- Salt Spray Testing Lab
- Sensor Testing as per Standard IEC 60751
- Services
- Servo-motor operated automatic line voltage correctors (20kVA) for single phase- S 9815 ( Part 1)
- Shipping and Transportation of Module Package Units
- SMP 10 calibration pyranometer
- SMPS testing lab-transformer testing as per IEC 61558-2-16
- Sodium ion cell/battery testing
- Software Testing
- Solar Fence Energizer Testing
- Solar Radiation Testing
- Solar Radiation Testing Services as per MIL-STD-810H and IEC 60068
- Standards and Specifications of major foods
- Submerged Motor IP Testing
- Surface coolant temperature by using IR camera testing
- Switch test as per IEC 60669-1
- Terms & Conditions
- Testing of Commercial Refrigerators & Freezers 60035-2-24
- Testing for High-voltage fuse as per IEC 60282-1
- Testing of Automatic Sanitizer Dispenser/Soap Dispenser as per IEC 60335-1
- Testing of Chemical composition
- Testing of Electric Food Mixers & Grinders IS 4250
- Testing of Vertical Road signs – EN 12966 – Variable Message Signs
- Testing Services (Core Areas)
- Thank You
- Training
- UN 38.3 lithium-ion batteries transpotation testing
- Understanding Quality of Masks
- UPS Testing
- Usability File
- Usability Testing of Medical Devices – IEC 62366
- UV Testing: Testing of UV light Bulbs
- Ventilator testing Lab as per: ISO 80601-2-12:2020
- Vibration Testing Lab
- Welcome to ITC INDIA
- WELCOME TO ITC INDIA
- WELCOME TO ITC INDIA
- What is Photometry Testing?
Visual-performance-requirements